Confused About Hansgrohe Talis S Kitchen Faucets

Hansgrohe has a good selection of high quality kitchen faucets, and I was intrigued once I saw my first Hansgrohe in action and up close. Heck, I even went with their Focus S Remodel Kit after learning about it. So why not continue the trend with a kitchen faucet?

While I originally like the Allegro E stylings, that water splashing was just way too much. I’m wondering if that 11 1/2″ spout height has anything to do with the force of the water splashing down on dishes? So I’m looking at other Hansgrohe kitchen faucets and the high arc Talis S looks cool. But there are a few models of the Talis S (not counting the smaller prep faucets) that is confusing.

Their web site shows:

• Talis S (#14877001)
• Talis S² HighArc Kitchen Faucet (#04310001)
• Talis S HighArc 2-Spray Pull-Down, (same as the Interaktiv HighArc 2 Spray Pull-Out??) (#06801000)

Then there’s also the “old” Talis S from what I understand. So which one is which? The current Talis S is a 2.2 GPM model and has an angled handle.

The “old” Talis S has a handle that is at 90-degrees (not slightly angled) and needs clearance behind the faucet profile for hot water. If your sink backspalsh is too close, the “old” Talis S handle would bump into it.

The “old” Talis S sounds like the Interaktiv HighArc2 model which sounds like the Talis S HighArc 2-Spray Pull-Down. These feature a 360-degree range of motion for the spout and a movable body for cleaning purposes. There is no mention of magnetic docking for the spray head.

The Talis S2 is a water-conserving 1.5 GPM faucet, has a magnetic docking spray head but only swivels 150 degrees. It has the slightly angled handle.

Then there is the Talis S. It’s 2.2 GPM, has the angled handle, needs no clearance for hot water, and has the magnetic spray head. Both the Talis S and S2 are 16 1/2″ tall with a 8 3/4″ projection. The spout height is 8 7/8″, a few inches lower than the Allegro E Kitchen Faucet. All of these come in finishes of chrome or steel optik.

You can find any and all of these models on Amazon but be sure you have the right model number for which Talis S you want. You might be able to find these stocked locally in Hawaii, just depends. As of today, I know Ferguson Hawaii has the Talis S available. Here’s a picture of their inventory on the shelf (looks like a mix of Talis S and the HighArc 2-Spray Pull-Down), but they supposedly have more in the warehouse.