Just how does Steph Curry wear his signature Under Armour Curry 2.5 shoes while protected by his preferred Zamst A2-DX ankle braces?
Even with the adjustable, wrap around fit of the “burrito lacing system,” I just don’t see how SC30 achieves a good fit as seen in the image above. It seems nearly impossible to close the tongue around the added thickness of the brace. Is that why he writes “I can do all things” on his shoes?
If G.I. Joe says knowing is half the battle then Starbucks says that anticipation is half the fun.
Though with the contents of the boxes known, there’s no anticipation. No anticipation means half the fun is gone, but yet knowing is half the battle. So where does that leave us?!?! Confused, I guess.
Although I’m not willing to pay a premium for customize designed kicks, this doesn’t stop me from playing around with the design process. Here are some miAdidas Dame 4 customizations.
Think I’ll just wait for Adidas to release yet another one of their many expected color ways for Damian Lillard’s signature sneaker.
In the bottom row of men’s shoes at Nordstrom Rack was this nondescript box.
Peaking over the edge of the box, I noticed something out of place, the Adidas AlphaBounce running shoes.
Amazingly this relatively new runner found its way to the discounted shelves. Must be flawed I thought while pulling them from the box. Then I spied its price and label of “Worn and Refinished.” But at $45 (down from $110), I had to take a closer look.
I couldn’t see any major issues or any flaws. There was this dirt spot, but it easily cleaned up with water.
Talking to a Nordstrom Rack employee, the “worn and refinished” label is often given to shoes that are bought and returned to the upscale Nordstrom. But when returned, the shoe is out of season so instead of trying to sell the shoe there, it’s transferred to a discounted Rack location. It doesn’t necessarily mean the shoe was actually worn and refinished. So now, I’m an owner of a slightly large Adidas AlphaBounce HPC (reflective model) in black/utility black/white.
A few more pics.
My latest Starbucks obsession is the Nitro Freddo. This drink starts with nitro cold brew on tap. Then it’s topped off with a dark caramel foam and a sprinkle of what looks like Starbucks instant VIA coffee.
Alone, the Nitro Cold Brew is a potent drink – highly caffeinated and all coffee flavor. The Freddo balances the cold brew with that wonderful foam. If possible, don’t savor the drink and let it sit. Drink the layers as is before everything dissolves together and enjoy the waves of flavor.
Unfortunately, this drink is only available at two locations on Oahu – Waikiki and Nuuanu. Yup, the Nitro Cold Brew is only on tap at these two stores. And this drink is expensive with a grande coming in around $5.70. But since the drink has no ice, it’s all Nitro Cold Brew, but it does get lukewarm quickly. Also, this drink has its own special lid made for sipping, not for straws.
This picture pretty much says it all about why I love getting gas from Sam’s Club Gas in Pearl City.
Yes, it’s open and that one other truck just pulled in right before I did.
During my last AT&T billing cycle, I exceeded my shared data plan limit and got this warning.
Luckily, my plan has no overage costs (like before), but mobility at 128kbps (G2-speeds) would be unbearable right?
Well, it wasn’t that bad. It was sufferable but tolerable. Of course, jumping onto available wifi was the first priority but otherwise data at 128kbps was doable for a short duration. Instead of upping my data plan up a tier, I’m gonna try another month and see what happens. I’ve tuned my phone to perform less checks and updates while using mobile data, and personally, I’ve been cutting back on frivolous use of my phone when bored.
Well, I surely hadn’t planned this and really, didn’t want this. But I spent a few days doing an unplanned comparison of wifi bridges. Now, these devices are reaching legacy status since many devices now have wireless networking built-in. But for those devices that only have wired Ethernet, they need a bridge to change from wired to wireless networking.
Initially, I had been using the NetGear WNCE2001-100NAS without issue. Okay, there was that one time I needed to reflash one unit, but after that, it’s been dependable. Setup is easy if not too basic. But once set, these worked (and continue to work). I can’t complain about wifi speed and range. Would like to have the power adapter use some kind of USB connection (to the device) rather than that tiny connector. But, but, but NetGear no longer makes these, and old stock online is super duper expensive.
So I went looking for a replacement…
First up was IOGear’s GWU627. Easy to setup but too unreliable. Sometimes I can’t ping the device, sometimes, I can’t connect to its web interface. Speaking of its web management interface, it’s horrible. It’s overly simplified, geared for a single purpose bridge configuration without any options unless you find its secret menu at:
192.168.1.252/menu.asp
From this link with a minimal UI, you can change some settings including the hardcoded IP address of 192.168.1.252. I’ll give the GWU627 credit though, once configured it booted up quickly and got to work. But then it didn’t work so good. Ping tests were all over the place – less than 10 ms, greater than 100 ms, timeouts. Wow. When actually used in its use case, this bridge just couldn’t handle the network demands and stalled out, never allowing the bridged wired device to finish its updates. Not good.
Next up, a coworker had a TP-Link Nanorouter, the TL-WR802N. This inexpensive, tiny white box is very flexible can can function in many networking scenarios like a traditional wireless router, a hotspot router, a range extender, and as a client (client mode is essentially a wifi bridge). The web interface of the WR802N is very thorough with all the options exposed. It took me an extra try to set up Client mode with a static IP, not the default DHCP setting. But then the WR802N didn’t bridge. I could ping the static IP given to the bridge but could not ping or connect to the bridged device. I tried and tried. I even saw posts online describing similar issues but with a fix in the form of beta firmware. After contacting technical support, I was sent an updated beta firmware the next day. Sadly, this didn’t fix my problem. I’m pretty sure I’m configuring the WR802N correctly also testing DHCP settings and connecting to different wifi networks, but no matter what, I couldn’t connect through the device’s wired Ethernet.
Lastly, I brought in my second generation Apple AirPort Express. To cut this short, it worked. The wired device connected wirelessly. The wifi connection was reliable and performance was consistent and stable. Unfortunately, the AirPort Express is the most expensive device out of the three.
So where does that leave me? I probably need a few of these wireless bridges and while the NetGear WNCE2001-100NAS fits my needs perfectly with respect to cost, performance, and setup, this device is simply too hard to get at a good price. So barring any other discoveries, the Apple AirPort Express is it.
Anyone else experience a “very sleepy” iPhone after installing iOS 11? I’ve encountered at least three times that my iPhone 7 doesn’t want to wake up right away. It’s usually after I put my phone to sleep then try to wake it immediately. The screen stays black. I know the iPhone is still on since the home button still provides haptic feedback (the “button” doesn’t do anything when the iPhone is off).
After a long delay, the iPhone wakes up but in the meantime, the dozy iPhone feels like it’s not working.
Still got a working Apple AirPort Express and want to configure it using a newer macOS such as 10.12 aka Sierra? Follow these helpful instructions.
The biggest gotcha is joining the correct wifi network name. For me, my reset AirPort Express was advertising a network of “Apple Network”. But if you follow steps 6 and 7, you have to change the name to “Apple Network” and append the last 6 characters of the AirPortID to “Apple Network” so it looks something like “Apple Network 1a2b3c”. Once that’s done, your Mac should be talking with the AirPort Express.
Now fire up the AirPort Utility 5.6.1 Launcher (skip the update notification) and you should see your AirPort Express available for configuration. Made a mistake? Reset the AirPort Express and start over.
On a related note, the original 802.11g version of the AirPort Express does not support bridge (aka client) mode according to Apple.
With a new Samsung refrigerator, I need to buy new water (and air?) filters.
Liking my new Yeti 20 oz tumbler that I picked up from Costco. This cup keeps hot things hot and cold drinks cold. The one thing that I’m missing is a sealable lid. It doesn’t have to be completely leakproof but being able to seal it enough so liquids don’t leak out while being schlossed around is welcomed.
There are a few types of spillproof lids available on Amazon, but I’m looking at this Yeti-branded magnetic version. The main draw for me is the ease of cleaning the sliding cover. Kinda pricey since you can find two sealable lids for about the same cost. But some of these pop open lids touch your nose when drinking. And this is really irritating. Really.